 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
The ARC-656 is a compact and portable stud welding power supply capable of welding studs thru 1/2" diameter reduced weld base. The power supply which operates on three phase power produces a smooth, stable welding arc. The front panel digital display indicates the weld time which is infinitely adjustable for preciseness and repeatability. The expanded time range provides fine adjustment of weld time for special short cycle applications such as welding to thin materials. |
 |
The ARC-800 is a compact and portable stud welding power supply capable of welding studs through 1/2" diameter weld base. The power supply which operates on single phase power has the added feature of weld current regulation that improves stud welding consistency. Both the weld time and weld currant are infinitely adjustable for preciseness and repeatability. A specially designed electronic gun control circuit has been incorporated to increase overall reliablity.
|
 |
The ARC-1200 is a compact and portable stud welding power supply capable of welding studs thru 5/8" diameter weld base. The fully regulated power supply which operates on three phase power produces a smooth, stable welding arc. Both the weld time and weld current are infinitely adjustable for preciseness and repeatability. For maximum flexibility the weld time can be switched between two ranges. The expanded short time range provides fine adjustment of weld time for special short cycle applications such as welding to thin materials. |
 |
The ARC-1200i is a compact, lightweight and portable stud welding power supply capable of welding studs thru 5/8” diameter weld base. The fully regulated power supply, based on inverter technology, produces a smooth, stable welding arc. Both the weld time and weld current are infinitely adjustable for preciseness and repeatability. Extremely portable, the power source weighs only 80 lbs.
|
 |
The ARC-1850 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. Stick welding and Arc air gouging processes are available only as an option. An added feature in the ARC-1850 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters. It is capable of welding studs from 12ga to 7/8" diameter with preciseness and repeatability.
|
 |
The ARC-3000 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. An added feature in the ARC-3000 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters.It is capable of welding studs from 1/4" to 1-1/4" diameter with preciseness and repeatability. |
 |
The AG-800 is a light weight and compact, but rugged, semi-automatic stud welding tool designed to weld any length stud with a weld base diameter range of 12 gauge through 5/8 inches. The AG-801 incorporates a hydraulic plunge dampener in the gun to minimize weld spatter and provide better weld fillet control. |
 |
The AG-804 is a set-lift style stud welding arc gun designed with fast response which is necessary for short cycle applications. The lift setting is adjustable. With the addition of the gas footpiece, ferruleless stud weld consistency is greatly improved. The lightweight and compact, but rugged stud welding arc gun can weld any length stud with a weld base diameter of 12ga through 5/8 inches. |
 |
The AG-805 is a shaped to the hand semi-automatic medium duty stud welding tool. Welds any length stud with a diameter range of 12 gauge through 5/8 inches. |
 |
The AG-900 is a shaped to the hand, semi-automatic Heavy Duty stud welding tool. A specially designed hydraulic plunge dampener is standard on the gun for weld thru deck and large diameter (1/4 - 1 1/4 inches) stud welding applications. |
 |
The Bantam A-58 stud welding gun is a multipurpose, compact, light weight tool designed for use in the arc stud welding process. Welds any length stud with a diameter range of 12 gauge through 1/2 inch.
|
|
|
 |
The CD-212 is a state-of-the-art solid state capacitor discharge stud/pin welder. Its lightweight design increases portability but with the power to weld 1/4" diameter flanged studs. The extremely short weld time of capacitor discharge process allows studs to be welded to material as thin as .015 without burn-through. The unit is capable of welding mild steel, stainless and aluminum studs, ranging from 14ga through 1/4" diameter. |
 |
The CD-212P is a state-of-the-art solid state capacitor discharge stud/pin welder. Its lightweight design increases portability but with the power to weld 1/4" diameter flanged studs. The extremely short weld time of capacitor discharge process allows studs to be welded to material as thin as .015 without burn-through. The unit is capable of welding mild steel, stainless and aluminum studs. |
 |
The CD-312 is a state-of-the-art solid state capacitor discharge stud/pin welder. Its rugged design and user friendly controls makes it simple to set up and use.The CD-312 is capable of welding 24 studs/min ideal for high production weld rate applications. The extremely short weld time of capacitor discharge process allows studs to be welded to material as thin as .015 without burn-through. The unit is capable of welding mild steel, stainless and aluminum studs, ranging from #2 through 5/16" diameter. |
 |
The CD-512 is a state-of-the-art solid state capacitor discharge stud/pin welder. Its rugged design and user friendly controls makes it simple to set up and use. The extremely short weld time of capacitor discharge process allows studs to be welded to material as thin as .015 without burn-through. The unit is capable of welding mild steel, stainless and aluminum studs, ranging from #2 through 3/8" diameter. |
 |
L.D. CD STUD WELDING GUNThe light duty CD welding gun is a compact, light weight tool made of high strength, impact resistant, glass fiber reinforced polycarbonate. Welds any length CD stud with a diameter range of 14 ga. Through 5/16 inches. Adapters are available to make the gun interchangeable with most CD stud welding collets and chucks. |
 |
BANTAM C-2 STUD WELDING GUNThe Bantam C-2 stud welding gun is a light weight and compact hand tool. Welds any length stud with a diameter range of 14 gauge through 3/8 inch. |
 |
C.D.GAP STUD WELDING GUN
|
 |
SLIM-LINE C.D. STUD WELDING GUNThe versatile, self triggering CD gun is used in applications where the standard size CD guns are too large to be positioned in the weld area. |
Tool repair
Our ability to service and repair shear wrenches, torqon wrenches and stud welding equipment is second to none. Our large parts inventory and expert knowledge ensure that your installation tools are fixed correctly the first time, without taking a big bite out of your maintenance budget. Look to us for your next tool repair and you'll discover why our customers come back time after time.
© 2005 LeJeune Bolt Company